Qosmotec Software Solutions
Qosmotec Software Solutions
Qosmotec Software Solutions
Qosmotec Software SolutionsQosmotec Software Solutions
Qosmotec Software Solutions
Qosmotec Software SolutionsQosmotec Software Solutions
Qosmotec Software Solutions
CompanyQosmotec SolutionsQosmotec ProductsSupportContact
Products  
 
Air Interface Simulator (AIS)
 
Specifications / Features
Architecture A Architecture B
Power Supply: 110-240 V, 50/60 Hz 110-240 V, 50/60 Hz
Attenuator Control: Integrated CPU External Linux PC
Control Interface: 10/100 Mbps Ethernet 10/100 Mbps Ethernet (high-speed array)
RS232C or IEEE 488 (low-speed array)
Frequency Range: 800-2000 MHz "GSM-module"
1600-2500 MHz "UMTS-module"
modules can be mixed in one system
1800-2400 MHz best performance
800-2900 MHz at reduced specifications
800-6000 MHz also available
Impedance: 50 Ohms 50 Ohms
RF Connectors: SMA female N female
Adjustable Attenuation: 0…95 dB 0…93 dB
Adjustment Resolution: 1.0 dB 1.0 dB
Maximum Single Step: 95 dB 93 dB
Accuracy: ± 0.5 dB (reduced bandwidth)
± 1.0 dB (full bandwidth)
1..23 dB: ±(0.3 dB + 5% of att. value)
24...93 dB: ±(0.5 dB + 10% of att. value)
reduction of range to 0...75 dB: ± 3.5 dB
VSWR in/out: <1.4 (full bandwidth, > 3dB adj. att.)
<1.2 (on request for limited bands)
typical: 2.0 (full bandwidth)
typical: 1.7 (1800-2400 MHz)
Insertion Loss, 2x2 array: 14 dB (900 MHz)…21 dB (2200 MHz) 14.5 dB (typical)…16.0 dB (max.)
Insertion Loss, 2x4 array: 21 dB (900 MHz)…28 dB (2200 MHz) 18.0 dB (typical)…20.5 dB (max.)
Insertion Loss, 4x4 array: 21 dB (900 MHz)…28 dB (2200 MHz) 21.5 dB (typical)…23.0 dB (max.)
Insertion Loss, 8x8 array: 28 dB (900 MHz)…35 dB (2200 MHz) 28.5 dB (typical)…30.0 dB (max.)
Max. Input Power: +23 dBm (2x2 array)
+26 dBm (2x4 / 4x4 arrays)
+29 dBm (8x8 array)
higher power levels on request
+26 dBm (2x2 / 2x4 arrays)
+30 dBm (=4x4 array)

higher power levels on request
Switching Delay: 8 µs < 30 µs (setting 1 attenuators; high-speed array)
< 80 µs (setting 36 attenuators; high-speed array)
< 120 µs (setting 64 attenuators; high-speed array)
< 10 ms (low-speed array)
Table File Playback: 1 ms resolution 1 ms resolution (high-speed array)
10 ms resolution (low-speed array)
Fast Fading Simulation: supported supported (high-speed array only)
Rack Dimensions: 19" x 4 U x 73 HP (regular)
19" cm x 1 U x 58 HP (compact)
19" x 3-9 U x 84 HP (depends on # of radio paths)
 
 
« go back  
 
AIR INTERFACE SIMULATOR  
Description
Characteristics
Specifications
 
DOWNLOAD  
AIS Brochure
 
PRODUCTS  
Overview
Air Interface Simulator (AIS)
Lab Test System (LTS)
Lab Test System - Field Adaptation (LTS-F)
Lab Test System - Portable (LTS-P)
QPER
QUANT
 
© 2004 - 2008 by Qosmotec Software Solutions GmbH | Schloß-Rahe-Straße 15 | D-52072 Aachen | Germany
webdesign by webdesign giese